SIMPLE WALLET - RAW EDGE (PDF w/SVG)
[This is the "RAW-EDGE" version of The Simple Wallet.
(Updated 07-25-24 / See note below)
For the "Turned-Edge" version see separate product listing, and read about the differences below.
This is a downloadable digital pattern. From the drop down menu above, select either PDF w/SVG or PDF only. The price is the same. Your device must be capable of extracting a zip file to access either option.
ABOUT
This is a modest and simple wallet. You don't realize how easy it is to make until you actually make one! There are no zippers, or card slots to make. Instead it uses an accordion card insert. It comes together fast. Yet with the provided methods and templates, it finishes professional looking. (Video tutorial links below - scroll down.)
LEVEL: Confident-Beginner to Intermediate
PATTERN INCLUDES
- 11 Pieces (4 required and 7 optional/design accents)
- Step-by-step photo instruction
- 6 optional design accents (2 stripes, 2 badges, and 2 pocket pieces)
- Visual diagrams for fast look up
- Templates for easy and accurate placement
- SVG files come with the pattern at no additional cost. (Select from the drop own)
- Helpful appendixes
- Product/Supply sources
- SVG ReadMe
- Using HeatnBond UltraHold with this pattern
- Using Spring/Fashion snaps
- Separate PDF with full-sized pieces for legal-size paper pringing
MACHINE
Can be sewn on a domestic sewing machine.
REQUIREMENTS
Materials
The pattern includes a separate PDF appendix with sources for materials. (Some sources with links are included at the bottom.)
Main Exterior: Scrap 8" wide x 12" high
If Vinyl: thin vinyl that has some structure but is not stiff or spongy.
If Leather: thin and soft/medium in temper chrome tan (2-3oz)
Contrast Accents:
Qty: 8" wide x 12" high (will vary depending on accents included)
If Vinyl: Slightly stiffer, but still pliable
If Leather: Medium temper (1.5oz -2oz)
Lining: "Self-Adhesive Wallet Liner" .14mm to 1.5mm | Qty 8" x 12"
Reinforcement: .5mm "bonded-leather reinforcement" (e.g. Salpa, Salamander or equivalent) See link to Salpa video below.
Reinforcement: Salpa in .5mm
(Salpa is a bonded-leather reinforcement. Watch video and see sources below)
Accordion Card-Slot Wallet Insert:
The recommended size is 2.17" high x 2.75" wide for most secure card-fit, however shorter inserts may fit. (See image of Accordion and sources listed below.)
Adhesives:
- If Vinyl - HeatnBond UltraHold Iron-On | Qty: 7" x 12" (Amazon.com)
- If Leather - Use Contact Cement (a water-based leather cement works, but my preference is solvent-based)
Hardware/Other
- 1 Spring Snap in 13-16mm (for front closure)
- 1 Spring Snap 12-14mm (for optional rear coin pocket)
- Cardstock is highly recommended for printing templates and pieces
TOOLS/SUPPLIES - REQUIRED
In addition to usual sewing supplies:
- Adhesive Product: Shown above
- Double-sided tape: Narrow 3-5mm (1/8")
- Roller tool
- Utility/Craft Knife (e.g. X-Acto type knife)
- Marking: Non-bleed thin pen
- Edge Finishing: Edge paint and application tools
- See general info page image for greater detail.
PRODUCT SOURCES - in Pattern Appendix
Self-Adhesive Wallet Liner
This product is available from where leather-craft supplies/tools are sold. This link provides sources that maintain inventory.
Accordion Card-Wallet Inserts
This product is sold by various sources. Here are a few.
Bonded Leather Reinforcement - e.g. Salpa
- TheBagMaking Academy - Salpa in .5mm (Half Sheet: 18" x 36")
- RMLeatherSupply.com - various from .5 to 2.0mm (Half-sheet to Full Panels)
- ArtisanLeatherSupply.com in .4, .6, 1.0mm (Half Sheets 18" 59")
COMPARING THE RAW-EDGE PATTERN TO THE TURNED-EDGE STYLE
The "Raw-Edge" version of the pattern is suited to vinyl or leather. It is recommended for confident-beginner to intermediate makers. The "Turned-Edge" pattern is geared to leather-crafters and is recommended for intermediate makers. While the body-silhouette is similar in both patterns, the body piece is shaped slightly different. However, the accents from both patterns can be used interchangeably on either pattern. Below is a side-by-side comparison.
ABOUT MATERIALS [3 min]
Answering 3 Most Frequent Questions About the Materials Used to Make this Wallet by Simple Artful Stuff
WHAT IS SALPA [2:27 min]
This pattern uses Salpa. See YouTube video:
What is SALPA by Simple Artful Stuff
TUTORIALS
MAKING THE SIMPLE WALLET
Kellie Toles of Sewful Creations
(Website: MySewfulCreations.com
In this easy-to-follow step-by-step video, Kellie breaks it all down for you, Simply. She shows you how to use the Salpa, adhesive wallet liner, accordion card insert, and templates with ease. Her included tips for edge painting, installing the snap, and using the templates to align fabric, builds skill and saves time. We all love and admire the professional-looking finish of Kellie’s work. Watch her video, and a successful end-result is easily achieved.
LINK to Video for RAW-EDGE Wallet 07-28-24 [0:58 min)
If you want to view Kellie Toles making the TURNED-EDGE version of the wallet, watch this VIDEO:
MAKING THE SIMPLE WALLET [RAW-EDGE]
Barb Oddo Taylor of Jeannie's Designs
(Website: JeannieBags.com)
LINK to Video #1 [ 1:17:06]
LINK to Video to #2 [0:56 min]
LINK to VIDEO #3 - Coming Shortly [0:51 min]
Barb shows you how she cuts out the wallet on her Scan'nCut and makes it.
(Aug 20, 2024)
PATTERN UPDATE NOTES 07-25-24
Corrections in PDF piece labeling were made. The Wave Stripe piece (on page 4) was corrected. Changes did not impact SVG files, but the dates were changed. An automated email with updated downlink was sent to anyone who purchased prior to this date.
PDF Pattern – pages 5 and 22
- Page 5: Labeling updated
- Page 22: Labeling on pieces corrected, and one-half of the Diamond piece was replaced.
PDF Appendix Full-Sized Pieces – page 4
- Page 4: Labeling on stipe accent pieces updated.